Battery power indicator 4. Sound level speaker volume 5. The digital still camera is powering up. The digital still camera is in the process of battery charge. Image is being processed and stored to memory.
USB communication is in progress. The self-timer function is activated. Page 15 Installing the Battery We highly recommend you to use the specified rechargeable lithium-ion battery to realize the full capability of your digital still camera. Make sure that the power of the digital still camera is off before inserting or removing the battery. Insert the battery in the correct orientation shown. Tilt the battery lock lever in the direction of the arrow and orient the battery so that its label is facing to the rear side of the camera, and then insert the battery.
When the battery has come out a little, slowly pull it out the rest of the way. Make sure that the power of the digital still camera is off and then insert the battery before starting. Insert the conversion adapter into the conversion adapter terminal of the camera as shown in the illustration.
Charging time differs depending on the ambient temperature and the status of battery. Damage caused by the use of an incorrect adapter is not covered under the warranty. Always make sure that the digital still camera is off before removing the battery.
The battery may feel warm after it has been charged or immediately after being used. When using the digital still camera in cold environments, keep the digital still camera and its battery warm by holding it inside your jacket or other warm protective environment. Perform the steps in the preceding section "Charging the Battery".
Always make sure the digital still camera is turned off before inserting or removing a memory card. Insert an SD memory card in the correct orientation as shown in the illustration. To remove the SD memory card, make sure the camera is turned off. Press lightly on the edge of the memory card and it will eject. Be sure to format an SD memory card with this digital still camera before using it.
To save, edit, or erase data on an SD memory card, you must unlock the card. The power is turned off automatically when the camera has not been operated for a defined period time. To resume the operation condition, turn the power on again. When turning the power on after leaving the camera without battery for an extended period of time. Slide the mode switch to [ ]. To increase the value, press the S button.
To decrease the value, press the T button. The time is displayed in hours format. Press the OK button after all fields are set. Press the OK button to confirm. Formatting is not possible if an SD memory card is locked. Slide the mode switch to [ ] or [ ]. To cancel formatting, select [NO]. To format the internal memory, do not insert a memory card into the camera.
Otherwise, you will format the memory card. Formatting is an irreversible action and data cannot be recovered at a later time. An SD memory card having any problem cannot be properly formatted. These settings affect the number of images that can be stored in memory, or on a memory card. High resolution and quality settings are recommended for printed output and situations requiring the finest detail. Press the button.
You can resize the images later. Please refer to section in this manual titled "Resizing an Image" for further detail. SD memory card Resolution x 5M x 3M x 1.
The actual capacity varies according to the shooting conditions and settings. Compose your image in the LCD monitor. Press the shutter button down halfway, then press it down fully. Pressing the shutter button down halfway automatically focuses and adjusts the exposure.
The focus-area frame turns blue when the camera is focused and the exposure is determined. When the focus or exposure is not suitable, the frame of the focus area turns yellow. If the photographic preview is set to "ON", the captured image will be displayed while the image is being recorded onto the memory.
This is not a malfunction. To prevent your images from being blurred while pressing the shutter button, always hold it carefully. This is especially important when you are shooting under low lighting conditions, which your camera may decelerate the shutter speed to ensure your images are properly exposed. To review the last-captured image, press the OK button. Press the OK button again to return to the camera mode. Make sure the camera is in [ ] mode. Press the The screen of scene mode menu is displayed.
AUTO Select this mode when you want to capture an image that makes the person stand out against a defocused blurred background. Select this mode to enhance color, saturation shown in mountains, forests and other landscape scenery or to take portraits that feature LANDSCAPE a landmark in the background.
The flash is fixed at [ ].. Select this mode to capture close-up subject. The flash is fixed at [ ]. The description of each scene serves as a general guide. Set the digital still camera to suit your own preferences. The scene mode can be set only in [ ] mode. You can further enlarge the center of the screen and capture images using the digital zoom.
Compose the image with the zoom button. Pressing the T button zooms in on the subject, and enlarges the subject on the LCD monitor. Pressing the W button provides a wider-angle image. The lens position moves according to the zoom button setting. Press the shutter button down halfway to set the focus and exposure, then press it down fully to capture the image.
Zoom function cannot be used while a video clip is recording. Digital zoom is a compelling feature, however, the more an image is enlarged zoomed , the more pixilated grainer the image will appear. To enable the digital zoom. Press the menu screen. To activate the digital zoom, press and hold the T button completely until the image on the LCD monitor expands.
Press the shutter button to capture a "zoomed" image. You can capture an image using a flash mode suitable to your circumstances. The screen of flash mode menu is displayed. The flash mode you set will be displayed on the LCD monitor. Compose your scene and press the shutter button. RED EYE When capturing images, the red-eye phenomenon can be reduced by asking the subject person to look at the digital still camera or get as close to the digital still camera as possible.
Use this mode in the environment that the flash use is NO FLASH prohibited or under the situation that the distance to the subject is too far away for the flash to have any effect. In the capture mode [ ] continuous and [ A ] AEB, the flash is fixed at [ ]. The flash cannot be used in the [ ] mode. This feature is useful for situations where you may wish to join into the scene when taking group shots. Secure the camera to a tripod or place it on a stable surface.
Toggle the button to select the desired self-timer mode. Compose your image and press the shutter button. The self-timer function is activated and the status of countdown is displayed on the LCD monitor. The self-timer LED flashes and the image will be captured after the preset time has elapsed. To cancel the self-timer during operation, press the button.
These settings are used when a suitable brightness exposure cannot otherwise be obtained in circumstances where the difference in brightness between the subject and the background the contrast is large, or when the subject that you wish to capture is very small within the scene.
Exposure can be set in 0. Quick Selection 1. Slide the mode switch to [ ] and press button. Press the S button to increase the value. Press the T button to decrease the value. The setting range of the exposure compensation is as follows: To reactive auto exposure, select [0EV] in step 4. To exit from the menu, press the button. With a digital camera, however, the color of the subject is influenced by the color of the light surrounding it.
This color adjustment is called "white balance adjustment". This setting allows you to set the white balance when capturing images under specific lighting conditions. Press the menu appears. This function is very useful for photographing objects in motion where it is difficult to determine the precise moment of capture.
Afterwards, you may review the sequence of images to select the best one. The indicator is displayed on the monitor screen. Press the shutter button down halfway to lock the focus. Press the shutter button down all the way to capture images.
Capturing will stop when the shutter button is released. Using AEB the camera will capture a sequential burst of three images at three different exposure settings. Afterwards, you may review the sequence of images to select the best exposure. The A indicator is displayed on the monitor screen.
Press the shutter button to capture images. Note that you must perform manual white balance under the same conditions you will be shooting. You must also have a piece of white paper or other similar object on hand in order to perform this function. Press the appears.
Point the camera at an enclosed gray card for which you can set the white balance. This starts the white balance adjustment procedure. The procedure of manual white balance is complete. This mode also provides a thumbnail image display, allowing you to quickly search for the desired image. Viewing Images 1. To view the previous image, press the W button. To view the next image, press the X button.
The S button rotates the image clockwise, whereas the T button rotates the image counterclockwise. This magnification allows you to view the details. Images that are being displayed can be enlarged in 8 times enlargement.
Adjust the zoom ratio by using the zoom button. To enlarge the selected image, press the T button. To return to normal magnification, press the W button. You will see a white frame with a pink box inside. The white frame indicates the entire image, while the pink box shows the location of the currently enlarged area. To return to regular display, toggle the W button until the regular display appears on the screen.
Press the button to enter [PLAY] menu. Press the button to exit from [PLAY] menu. Press the W button. Four or nine thumbnail images are displayed simultaneously. As appropriate, the [ display. This is very useful and entertaining feature for reviewing recorded images and for presentations.
The slide show starts. BACK : Each video clip is presented by the first frame of the video clip. To stop the slide show display, press the OK button. Slide the mode switch to [ 2. Compose the image with the zoom button, if desired. Optical zoom should be set while composing the scene. Optical zoom cannot be used during movie capture. Press the shutter button again to stop recording.
VGA The flash and self-timer cannot be used in [ ] mode. Doing so might damage the SD card or destroy the data. Press the shutter button to start playing back a video clip.
To pause or resume video playback, press the shutter button. To stop playback, press the OK button. Use the T button to start fast-reverse playback. Use the S button to start fast-forward playback. To play back video clips on the computer, we recommend you to use Windows Media Player 9. You can download WMP version from the website at www. Pressing the button in video playback mode changes the LCD display in the sequence of: Indicators on J Indicators off.
It is recommended you use an AC power adapter while playing back recorded images and videos on TV. Turn the TV and digital still camera on. The method of operation is the same as playing back still images and video clips on the digital still camera.
Please note that the deleted images or video clips cannot be recovered. Immediate Erasure Quick Delete Function The quick delete function enables you to delete the last image during capture. The last image and delete message appears on the screen.
If you wish to cancel the deletion, select [NO]. The protect icon is displayed on each protected video and image. Canceling protection To cancel protection for an image or video, display the image or video for which you wish to remove the protection.
Files saved in the DPOF format can be printed using compatible printers or through a laboratory printing device. The DPOF setup screen is displayed. Press the OK button. Press the button to return to the image playback mode. The have set up DPOF settings. X01 9. The DPOF function can be used only on still images that are saved on memory cards.
The new screen will welcome you the next time you turn on the camera. Recording Voice Files 1. Press the button to access Audio mode. A indicator is displayed on the screen. Recording stops when you press the shutter button again. Voice playlist appears on the screen. To resume playback, press the OK button. To stop playback, press the OK button again.
Make sure the camera is in Audio mode. Press the button to delete the selected voice file. Pause playback of a voice file Press the button to pause playback of a voice file. Delete a voice file Press the voice files.
In order to do this, you must install the USB driver onto your computer first. Before you starts to install the USB driver, you need to check your system according to the following table.
Follow the on-screen instructions to complete the installation. After the USB driver has been installed, restart your computer. Connect one end of the USB cable to the conversion adapter terminal of the camera. If you use the conversion adapter to connect the USB cable, insert the conversion adapter into the conversion adapter terminal of the camera first, and then connect one end of the USB cable to the USB terminal of the conversion adapter.
Turn on the camera. For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop. Your images are inside these folder s. You may also drag and drop image files from the digital still camera to a desired location. Drag and drop from the digital still camera to the desired destination. Memory card users may prefer to use a memory card reader highly recommended. Video playback application is not included with the package. Make sure that video playback application has been installed in your computer.
Connecting the camera to the printer 1. The "USB" screen is displayed. Use the X button to access in the selection of paper setting, then press the OK button to confirm. You can select the number up to Then, press the OK button to print.
The message will disappear after the printing is finished. Use the X button to access in the selection of paper setting, then press the OK button to print. This mode is not supported for Mac. The PC camera function is not supported for Mac platforms.
After the driver installation is completed, restart your computer. Position the digital still camera steadily on top of your computer monitor or use a tripod. When using this digital still camera as a PC camera, it is necessary to install the battery into the digital still camera or use an AC power adapter. Step 3: Running your application software i. Click the Start Video button to view live video. Click the Place Call button. Type the e-mail address or the network address of the computer that you are calling.
Click Call. The person that you are calling must also have Windows NetMeeting running and be willing to accept your call to start the videoconference. EN The video resolution for videoconferencing applications is generally x For more information about the operation of videoconference application software, refer to its respective help documentation.
Page 61 Installing Photo Explorer Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the media through the medium of your choice: Email, Print, Slideshow Presentations.
It is an indispensable all-in-one tool for owners of digital cameras, WebCams, DV camcorders, scanners, or anyone who strives to effectively organize a large collection of digital media. For more information about the operation of Photo Explorer application software, refer to its respective help documentation.
Photo Explorer is not supported on the Mac. The step-by-step workflow, visual program interface, and in-program help assist users in creating exciting photo projects. Acquire digital photos effortlessly from digital cameras or scanners.
Organize them conveniently with the Visual Browse mode. Use hundreds of ready-to-use templates such as albums, cards, posters, slideshows, and more. Edit and enhance images with photo editing tools, photographic filters, and special effects.
Embellish projects by adding creative design elements such as frames, callouts, and stamp objects. Share results with family and friends via e-mail and multiple print options. For information on how to use Photo Express to edit and retouch your recorded images, please refer to its online help.
Photo Express is not supported on the Mac. Manual WB is convenient when the white balance presets do not offer a good match to your specific lighting conditions. The exposure compensation value can be set in the range from —2. Stop indicator 7. Fast reverse playback indicator 8. Fast forward playback indicator 9. Video status bar Audio mode 2. SD memory card indicator if present 3. Battery power indicator 4. Sound level speaker volume 5. The digital still camera is powering up.
The digital still camera is in the process of battery charge. Image is being processed and stored to memory. USB communication is in progress. The self-timer function is activated. Page 15 Installing the Battery We highly recommend you to use the specified rechargeable lithium-ion battery to realize the full capability of your digital still camera.
Make sure that the power of the digital still camera is off before inserting or removing the battery. Insert the battery in the correct orientation shown. Tilt the battery lock lever in the direction of the arrow and orient the battery so that its label is facing to the rear side of the camera, and then insert the battery.
When the battery has come out a little, slowly pull it out the rest of the way. Make sure that the power of the digital still camera is off and then insert the battery before starting. Insert the conversion adapter into the conversion adapter terminal of the camera as shown in the illustration.
Charging time differs depending on the ambient temperature and the status of battery. Damage caused by the use of an incorrect adapter is not covered under the warranty. Always make sure that the digital still camera is off before removing the battery. The battery may feel warm after it has been charged or immediately after being used.
When using the digital still camera in cold environments, keep the digital still camera and its battery warm by holding it inside your jacket or other warm protective environment. Perform the steps in the preceding section "Charging the Battery". Always make sure the digital still camera is turned off before inserting or removing a memory card.
Insert an SD memory card in the correct orientation as shown in the illustration. To remove the SD memory card, make sure the camera is turned off.
Press lightly on the edge of the memory card and it will eject. Be sure to format an SD memory card with this digital still camera before using it. To save, edit, or erase data on an SD memory card, you must unlock the card. The power is turned off automatically when the camera has not been operated for a defined period time. To resume the operation condition, turn the power on again. When turning the power on after leaving the camera without battery for an extended period of time.
Slide the mode switch to [ ]. To increase the value, press the S button. To decrease the value, press the T button. The time is displayed in hours format.
Press the OK button after all fields are set. Press the OK button to confirm. Formatting is not possible if an SD memory card is locked. Slide the mode switch to [ ] or [ ]. To cancel formatting, select [NO]. To format the internal memory, do not insert a memory card into the camera. Otherwise, you will format the memory card. Formatting is an irreversible action and data cannot be recovered at a later time. An SD memory card having any problem cannot be properly formatted.
These settings affect the number of images that can be stored in memory, or on a memory card. High resolution and quality settings are recommended for printed output and situations requiring the finest detail. Press the button. You can resize the images later. Please refer to section in this manual titled "Resizing an Image" for further detail.
SD memory card Resolution x 5M x 3M x 1. The actual capacity varies according to the shooting conditions and settings. Compose your image in the LCD monitor. Press the shutter button down halfway, then press it down fully. Pressing the shutter button down halfway automatically focuses and adjusts the exposure. The focus-area frame turns blue when the camera is focused and the exposure is determined. When the focus or exposure is not suitable, the frame of the focus area turns yellow.
If the photographic preview is set to "ON", the captured image will be displayed while the image is being recorded onto the memory. This is not a malfunction. To prevent your images from being blurred while pressing the shutter button, always hold it carefully. This is especially important when you are shooting under low lighting conditions, which your camera may decelerate the shutter speed to ensure your images are properly exposed.
To review the last-captured image, press the OK button. Press the OK button again to return to the camera mode. Make sure the camera is in [ ] mode. Press the The screen of scene mode menu is displayed. AUTO Select this mode when you want to capture an image that makes the person stand out against a defocused blurred background.
Select this mode to enhance color, saturation shown in mountains, forests and other landscape scenery or to take portraits that feature LANDSCAPE a landmark in the background. The flash is fixed at [ ]..
Select this mode to capture close-up subject. The flash is fixed at [ ]. The description of each scene serves as a general guide. Set the digital still camera to suit your own preferences. The scene mode can be set only in [ ] mode. You can further enlarge the center of the screen and capture images using the digital zoom.
Compose the image with the zoom button. Pressing the T button zooms in on the subject, and enlarges the subject on the LCD monitor. Pressing the W button provides a wider-angle image. The lens position moves according to the zoom button setting. Press the shutter button down halfway to set the focus and exposure, then press it down fully to capture the image.
Zoom function cannot be used while a video clip is recording. Digital zoom is a compelling feature, however, the more an image is enlarged zoomed , the more pixilated grainer the image will appear.
To enable the digital zoom. Press the menu screen. To activate the digital zoom, press and hold the T button completely until the image on the LCD monitor expands. Press the shutter button to capture a "zoomed" image. You can capture an image using a flash mode suitable to your circumstances. The screen of flash mode menu is displayed.
The flash mode you set will be displayed on the LCD monitor. Compose your scene and press the shutter button. RED EYE When capturing images, the red-eye phenomenon can be reduced by asking the subject person to look at the digital still camera or get as close to the digital still camera as possible. Use this mode in the environment that the flash use is NO FLASH prohibited or under the situation that the distance to the subject is too far away for the flash to have any effect. In the capture mode [ ] continuous and [ A ] AEB, the flash is fixed at [ ].
The flash cannot be used in the [ ] mode. This feature is useful for situations where you may wish to join into the scene when taking group shots. Secure the camera to a tripod or place it on a stable surface. Toggle the button to select the desired self-timer mode. Compose your image and press the shutter button. The self-timer function is activated and the status of countdown is displayed on the LCD monitor. The self-timer LED flashes and the image will be captured after the preset time has elapsed.
To cancel the self-timer during operation, press the button. These settings are used when a suitable brightness exposure cannot otherwise be obtained in circumstances where the difference in brightness between the subject and the background the contrast is large, or when the subject that you wish to capture is very small within the scene.
Exposure can be set in 0. Quick Selection 1. Slide the mode switch to [ ] and press button. Press the S button to increase the value. Press the T button to decrease the value. The setting range of the exposure compensation is as follows: To reactive auto exposure, select [0EV] in step 4. To exit from the menu, press the button. With a digital camera, however, the color of the subject is influenced by the color of the light surrounding it.
This color adjustment is called "white balance adjustment". This setting allows you to set the white balance when capturing images under specific lighting conditions. Press the menu appears. This function is very useful for photographing objects in motion where it is difficult to determine the precise moment of capture. Afterwards, you may review the sequence of images to select the best one. The indicator is displayed on the monitor screen. Press the shutter button down halfway to lock the focus.
Press the shutter button down all the way to capture images. Capturing will stop when the shutter button is released. Using AEB the camera will capture a sequential burst of three images at three different exposure settings.
Afterwards, you may review the sequence of images to select the best exposure. The A indicator is displayed on the monitor screen. Press the shutter button to capture images. Note that you must perform manual white balance under the same conditions you will be shooting. You must also have a piece of white paper or other similar object on hand in order to perform this function.
Press the appears. Point the camera at an enclosed gray card for which you can set the white balance. This starts the white balance adjustment procedure.
The procedure of manual white balance is complete. This mode also provides a thumbnail image display, allowing you to quickly search for the desired image. Viewing Images 1. To view the previous image, press the W button. To view the next image, press the X button.
The S button rotates the image clockwise, whereas the T button rotates the image counterclockwise. This magnification allows you to view the details. Images that are being displayed can be enlarged in 8 times enlargement.
Adjust the zoom ratio by using the zoom button. To enlarge the selected image, press the T button. To return to normal magnification, press the W button. You will see a white frame with a pink box inside. The white frame indicates the entire image, while the pink box shows the location of the currently enlarged area. To return to regular display, toggle the W button until the regular display appears on the screen. Press the button to enter [PLAY] menu. Press the button to exit from [PLAY] menu.
Press the W button. Four or nine thumbnail images are displayed simultaneously. As appropriate, the [ display. This is very useful and entertaining feature for reviewing recorded images and for presentations.
The slide show starts. BACK : Each video clip is presented by the first frame of the video clip. To stop the slide show display, press the OK button. Slide the mode switch to [ 2. Compose the image with the zoom button, if desired. Optical zoom should be set while composing the scene. Optical zoom cannot be used during movie capture. Press the shutter button again to stop recording. VGA The flash and self-timer cannot be used in [ ] mode. Doing so might damage the SD card or destroy the data.
Press the shutter button to start playing back a video clip. To pause or resume video playback, press the shutter button. To stop playback, press the OK button. Use the T button to start fast-reverse playback. Use the S button to start fast-forward playback. To play back video clips on the computer, we recommend you to use Windows Media Player 9.
You can download WMP version from the website at www. Pressing the button in video playback mode changes the LCD display in the sequence of: Indicators on J Indicators off.
It is recommended you use an AC power adapter while playing back recorded images and videos on TV. Turn the TV and digital still camera on. The method of operation is the same as playing back still images and video clips on the digital still camera. Please note that the deleted images or video clips cannot be recovered. Immediate Erasure Quick Delete Function The quick delete function enables you to delete the last image during capture.
The last image and delete message appears on the screen. If you wish to cancel the deletion, select [NO]. The protect icon is displayed on each protected video and image. Canceling protection To cancel protection for an image or video, display the image or video for which you wish to remove the protection.
Files saved in the DPOF format can be printed using compatible printers or through a laboratory printing device. The DPOF setup screen is displayed. Press the OK button. Press the button to return to the image playback mode. The have set up DPOF settings. X01 9.
The DPOF function can be used only on still images that are saved on memory cards. The new screen will welcome you the next time you turn on the camera. Recording Voice Files 1. Press the button to access Audio mode. A indicator is displayed on the screen. Recording stops when you press the shutter button again. Voice playlist appears on the screen. To resume playback, press the OK button. To stop playback, press the OK button again. Make sure the camera is in Audio mode. Press the button to delete the selected voice file.
Pause playback of a voice file Press the button to pause playback of a voice file. Delete a voice file Press the voice files. In order to do this, you must install the USB driver onto your computer first. Before you starts to install the USB driver, you need to check your system according to the following table. Follow the on-screen instructions to complete the installation. After the USB driver has been installed, restart your computer. Connect one end of the USB cable to the conversion adapter terminal of the camera.
If you use the conversion adapter to connect the USB cable, insert the conversion adapter into the conversion adapter terminal of the camera first, and then connect one end of the USB cable to the USB terminal of the conversion adapter. Turn on the camera. For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop. Your images are inside these folder s.
You may also drag and drop image files from the digital still camera to a desired location. Drag and drop from the digital still camera to the desired destination. Memory card users may prefer to use a memory card reader highly recommended. Video playback application is not included with the package.
Make sure that video playback application has been installed in your computer. Connecting the camera to the printer 1. The "USB" screen is displayed. Use the X button to access in the selection of paper setting, then press the OK button to confirm. You can select the number up to Then, press the OK button to print. The message will disappear after the printing is finished. Use the X button to access in the selection of paper setting, then press the OK button to print.
This mode is not supported for Mac. The PC camera function is not supported for Mac platforms. After the driver installation is completed, restart your computer.
Position the digital still camera steadily on top of your computer monitor or use a tripod. When using this digital still camera as a PC camera, it is necessary to install the battery into the digital still camera or use an AC power adapter.
Step 3: Running your application software i. Click the Start Video button to view live video. Click the Place Call button.
Type the e-mail address or the network address of the computer that you are calling. Click Call. The person that you are calling must also have Windows NetMeeting running and be willing to accept your call to start the videoconference.
EN The video resolution for videoconferencing applications is generally x For more information about the operation of videoconference application software, refer to its respective help documentation. Page 61 Installing Photo Explorer Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the media through the medium of your choice: Email, Print, Slideshow Presentations.
0コメント