01fx manual

Dimensional drawings Block diagram Phantom power Input level controls Noise reduction Assigning the effect Selecting the effect type Selecting the effect Setting the parameter Setting the effect volume Available multi-effect settings Turning the reverb on and off Using the reverb Setting the reverb type Setting the reverb time Handling of compact discs Playing back audio CDs Making an audio CD Writing by Disk At Once Writing by Track at Once Finalizing CDs Erasing Audio CDs Importing from a CD Exporting to CDs Backing up songs to a CD Restoring songs from a CD Erasing data CDs CD-related Error Messages How do I..?

Figure 1. Figure 2. Figure 3. Read this section first. It contains important basic information about using your DP 01 effectively, and will help you create exciting original musical projects. This 8 track digital hard disk recorder is designed to provide you with great sound in an easy to use compact package, allowing you to concentrate on the music, and not on the recording process.

The DP 01 contains a large hard disk, allowing you to record many hours of music, up to two tracks at a time, to a maximum of eight tracks, and then mix them down to a pair of mastered stereo tracks using the built in mixing facilities. The stereo mix can then be played back into a suitably equipped CD recorder, etc. In addition, individual tracks can be imported and exported between your DP 01 and a personal computer, and songs can be archived, backed up and restored using a PC.

Whether or not you have had experience in multitrack recording, you should read this manual in order to understand how to get the best out of the DP This first section gives you an idea of the basic operations of the DP and will get you started with recording. When we show messages, etc. This manual cannot begin to be a full guide to multitrack recording tech niques. Troubleshooting The DP 01 was designed to be easy to use, but some times you may need a little help.

How to do it? Refer to this section when you want to know how to perform a particular operation. Getting started. Any exceptions are noted. When using the DP, use only the power adaptor and cable supplied with product. Do not use this power. Also, do not wear headphones connected to the DP when switching power on or off. This will avoid damage to speakers, etc. The screen shows:. Always shut down the DP according to these instructions.

The display shows: Storing Song This red indicator shows that the hard disk or the CD-RW drive is in use. Although the DP is not exactly a delicate piece of equipment, you should take care with it, as with all electronic equipment, especially when the hard disk is in operation or when it is writing to CDs.

Before the DP 01 is shipped, demo songs are stored on its hard disk. Fol low the procedure below to play back these demo songs. Eight tracks of each demo song is available. The DP uses a menu system which allows you to make settings, and perform many operations. This section explains how to use the menu system and to check and make settings.

Press the MENU key to bring up the opening menu screen:. Use the wheel or the and keys to scroll up and down through the list of top-level menus. Note how the : symbol changes to an inverted triangle when the menu is highlighted. At the bottom right of all menu screens is a symbol showing whether there are more menus below the current list , above the current list , or above and below the current list.

Press the cursor key to enter the selected menu. The screen below shows the SONG menu:. Use the jog wheel or the and keys to select an action from the menu here the ERASE option is selected—note that there are options above and below the current list :. Use the jog wheel or the and keys to move the cursor to select the song to be erased, and then press the ENTER key.

Some screens allow a number of values to be filled in. In these cases, you should use the and keys to move the cursor and the wheel to set the value:. Use the jog wheel to change the letter above the underlined cursor. The song, with its new name, is stored to disk. Before you start recording with the DP, you will need to make a few connections to other equipment. Guitars, basses Synths, pre-amps etc. Turn the input level controls so that. Synthesizers, etc. Connecting your DP to other equipment.

You will use this switch when you are recording from input A and input B at the same time. There are two positions:. When you have mastered the stereo track and you want to record it, set the stereo monitoring system so that the recorder is set to record from the AUX source. Now you are monitoring or listening through your stereo system. These can be used to connect an external stereo sub mixer, synthesizer, drum machine, CD player, etc.

They cannot be recorded on the DP 01, nor can you adjust the signal level using the DP Digital output Use a standard optical digital cable to connect this rear panel, close to the power switch to a suitable digital stereo input of a mon itoring system, or stereo recorder. MIDI output Use this rear panel to connect a sequencer, drum machine, etc. This section shows you how to create a new song, as well as basic song management, such as renaming, deleting, copying, etc.

The current song is stored even though the new song has not yet been created. The screen shows a message Saving Song as the song is saved. If you erase the current song, the first song in the list is automatically loaded.

Managing your songs. A check mark appears by the song title. The check mark disappears. You are asked if you are sure. You can erase all the songs shown, and a new song is automatically created. There is always at least one song on partition. From the home screen, press and hold the EXIT key.

While you hold down the EXIT key, the display shows:. The current partition Part , song title Song and amount of time left on the partition for recording RecRem in minutes. You can record on up to two tracks at a time. If you want to assign the input to another track, you must first clear the current assignment see below , and then re-assign the input.

You may want to turn off unused inputs to reduce noise. Assigning inputs. The track REC indicators stop flashing and light steadily.

To return to the zero point, press and hold down the STOP key and. Remember to reassign the inputs as well as arming the tracks. Press the REW or F FWD keys for a short while and then release them to move backwards or forwards through your recording like a tape recorder. Press and hold these keys to increase the rewind or fast forward speed. Press STOP to stop again, like a tape recorder. The DP has many advanced features which you may want to use later on.

Though we don't want to go into all of them now, you should be aware of a few of them now. When recording, press the PLAY key to stop recording punch out. If you have a footswitch connected to the PUNCH jack, you can press the footswitch to change between playback and recording, as long as at least one track is armed for recording.

You can automate the punch process by setting in and out points. The DP provides eight tracks for recording. But what happens if you want to record more than eight instruments? You can take existing tracks, mix them, and record them to unused tracks, freeing up the tracks you just mixed for recording additional tracks. Because the DP is a hard disk recorder, not a tape recorder, there are many options available to you which would be extremely difficult, or even impossible, with a tape-based recording system.

This is the last stage in creating a song, allowing you to create a file which you can play back into a stereo recorder, and export to a WAV file for further processing, archiving, recording, etc. This is the amount of signal sent from each track to the effect. You can use this to add effects only to certain tracks. Use the PAN controls to adjust the left-right position of each track in the stereo mix.

Before starting the mastering procedure, you must set the OUT point. This is where the mastering process stops. Make the mix moves faders, pan, etc. These mix moves will affect the sound of the final master stereo track. Now when you press PLAY , you can hear the master stereo mix you have just created. This mix is output through the analog and digital outputs, and you can record it on a stereo recorder. The new mix will overwrite your previous mix.

If a song has had a master stereo mix recorded and saved with it, you can play back this master stereo mix whenever the song is loaded, by pressing the MASTER key until it is lit steadily and then pressing PLAY. Any MIDI synchronization, etc. If you try to perform these operations, a popup message tells you that you are in mastering mode. Mixdown and mastering. Welcome to ManualMachine.

We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. This equipment generates, uses and. However, there is no guarantee that interference.

If this. Changes or modifications to this equipment not. Telephone number : Operation is subject to the following two conditions : 1 This. The exclamation point within an equilateral triangle is intended to alert the user to the presence.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the. This appliance has a serial number. Please record. Do not use this apparatus near water. Do not block any ventilation openings. Install in. Do not install near any heat sources such as radi-. Do not defeat the safety purpose of the polarized or. A polarized plug has two blades. Grounding type plug has. The wide. When a cart is used, use caution. Servicing is required when the apparatus has.

Do not expose this apparatus to drips or splashes. Do not place any objects filled with liquids, such. Do not install this apparatus in a confined space. The apparatus draws nominal non-operating. The apparatus should be located close enough to. An apparatus with Class I construction shall be.

This product has been designed and manufactured. Health and Safety Act of ", and is classified as a. There is no hazardous invisible. Manufacturer:Sanyo Electric Co,Ltd. Laser output on the objective lens :. Read Power; Less than 1. Write Power; Less than 74mW record. This manual DP Line-up What's in the box About the power adaptor Starting up the DP Shutting down the DP How to play back demo songs Connecting your DP to other equipment. Creating a new song Storing songs